Image | Product ID | Price | Qty | Add to Cart | Link |
|---|
| - (1) 6061 6MM Machined Bearing Block
- (4) M3x10MM BHCS
- (1) 608ZZ Bearing
| | | | |
| - (100) M3x8 Socket Head Cap Screws
- (100) M3 20 Series T Nuts
| | | | |
| - (1) 1/8" HDPE Rough one side with mounting holes
- Mounting Hardware
| | | | |
| - Machined Bed
- Mounting Hardware
| | | | |
| - Machined Bed
- Mounting Hardware
| | | | |
| - Machined Bed
- Mounting Hardware
| | | | |
| - Machined Bed
- Mounting Hardware
| | | | |
| - (1) 6061 6MM Machined Inside Bracket
- (4) M5x12MM BHCS
- (4) M5 Square Nuts
| | | | |
| - (1) 6061 6MM Machined Inside Bracket
- (8) M5x12MM BHCS
- (8) M5 Square Nuts
| | | | |
| - (1) 6061 6MM Machined Inside Bracket
- (8) M5x12MM BHCS
- (8) M5 Square Nuts
| | | | |
| - (1) Set of 6061 6MM Machined Interlocking Brackets
- (16) M5x12MM BHCS
- (16) M5 Square Nuts
| | | | |
| - (1) Set of 6061 6MM Machined Interlocking Brackets
- (12) M5x12MM BHCS
- (12) M5 Square Nuts
| | | | |
| - (1) Set of 6061 6MM Machined Interlocking Brackets
- (8) M5x12MM BHCS
- (8) M5 Square Nuts
| | | | |
| - (2) GT2 6MM 20T Drive Pulleys - Standard or High Quality (gates)
- (2) 6MM GT2 Smooth Idlers - Standard or High Quality (gates)
- (6) 6MM GT2 20T Idlers - Standard or High Quality (gates)
- (6) 1MM Spacers
- (2) 4MM Spacers
- (2) 20MM Spacers
- (2) 35MMx5MM Shoulder Bolts
- (6) 12MMx5MM Shoulder Bolts
| | | | |
| | | | | |
| - (1) 6061 6MM Machined Multi-Bracket
- (14) M5x12MM BHCS
- (14) M5 Square Nuts
| | | | |
| - (1) 6061 6MM Machined Motor Plate
- (8) M5x12MM BHCS
- (8) M5 Square Nuts
- (1) M5x12MM FHCS
- (4) M3x10MM BHCS
| | | | |
| - (1) 6061 6MM Machined Motor Slide
- (1) 6061 6MM Machined Motor Slide Mount
- (1) Printed PETG Thumb Screw Mount
- (1) M6x30MM Thumb Screw
- (3) M4x10SHCS
- (2) M4x10BHCS
- (3) M4x8x13MM Spacers
- (3) M4 Washers
- (3) M4x25SHCS
- (1) M6 Hex Nut
- (4) M3x10SHCS
| | | | |
| - (1) 6061 6MM Machined Motor Slide
- (1) 6061 6MM Machined Motor Slide Mount
- (1) Printed PETG Thumb Screw Mount
- (1) M6x30MM Thumb Screw
- (3) M4x10SHCS
- (2) M4x10BHCS
- (3) M4x8x32MM Spacers
- (3) M4 Washers
- (3) M4x45SHCS
- (1) M6 Hex Nut
- (4) M3x10SHCS
| | | | |
| - (1) 6061 6MM Machined Block Mount
- (2) 6061 6MM Machined Tie Plates
- (12) M3x10MM Button Head Cap Screws
- (4) M3x 6MM Socket Head Cap Screw
| | | | |
| - (1) 6061 Machined Block Mount
- (2) 6061 3MM Machined Face Plates
- (8) M3-FF-8MM Standoffs
- (2) M3-FF-28MM Standoffs
- (4) Belt Ties
- (8) M3x6MM Socket Head Cap Screws
| | | | |
| - (1) 6061 Machined Aluminum Rail Mount
- (8) M5x12MM Button Head Cap Screws (mounts kit to frame)
- (4) M5 Square Nuts
- (8) M3x10MM Button Head Cap Screws (mounts kit to MGN12H)
- (24) M3x8MM Socket Head Cap Screws (mounts 600mm MGN12 rail)
| | | | |
| - (1) 6061 Machined Aluminum Rail Mount
- (8) M5x12MM Button Head Cap Screws (mounts kit to frame)
- (4) M5 Square Nuts
- (8) M3x10MM Button Head Cap Screws (mounts kit to MGN12H)
- (20) M3x8MM Socket Head Cap Screws (mounts 500mm MGN12 rail)
| | | | |
| - (1) 6061 Machined Aluminum Rail Mount
- (8) M5x12MM Button Head Cap Screws (mounts kit to frame)
- (4) M5 Square Nuts
- (8) M3x10MM Button Head Cap Screws (mounts kit to MGN12H)
- (12) M3x8MM Socket Head Cap Screws (mounts 300mm MGN12 rail)
| | | | |
| - (1) 6061 Machined Aluminum Rail Mount
- (8) M5x12MM Button Head Cap Screws (mounts kit to frame)
- (4) M5 Square Nuts
- (8) M3x10MM Button Head Cap Screws (mounts kit to MGN12H)
- (16) M3x8MM Socket Head Cap Screws (mounts 400mm MGN12 rail)
| | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| High Quality LDO Linear Rail - Oiled & Tested Before its Shipped | | | | |
| | | | | |
| | | | | |
Frank Nichols –
My wife bought me this for fathers day. I was so excited…Just remove the end caps right, wrong. On the lower bars remove the 4 bolts that hold the front bar on, gently lift the bar with one hand, insert the t-nuts in the slot with your other 2. slid them along the slot, add your top 2 slide them into the t slot tighten all of them up. repeat on other side
Beside that , they are well designed, well executed and well made. Guys use a little less plastic rap….will ya…you like plastic rap the way I like duck tape…
Also when cutting them you might think about cutting your name in them somewhere, you make a great product…brag..
Also short 1 bolt and T-nut combo, but hell that is no big deal…I just went 1 less on top bar…
I would recommend this to any one who has a printer, and I hope they read this because I hate to type, my wife laughs at me, I am the only computer she knows that types with 4 fingers…
I hope this review did your product justice…
Sales –
Frank, Thank you so much for the Review! We will definitely take your input and use it. we will get you and your son out some stickers and a couple of bolts not sure how that happened. My shipping team will be addressed. Also, the logo will be cut or etched on future products we have had that in the works! Thank you Again!